Slingshot Rapidtrack Flag Screw Mounting Hardware 2024

DESCRIPTION

Slingshot "Flag Screws" are a complete TOOL-LESS hardware solution that will eliminate managing screws and track nuts or losing them when they fall out of the board in transit. *Flag Screws are M6, a smaller size than our standard foil track hardware. We recommend purchasing RapidTrack T-Nuts along with these screws to ensure compatibility.

PACKAGE INCLUDES:

• 4 x RapidTrack Flag Screws (M6 x 25mm)
• 4 x M6 Aluminum T Nuts
• 4 x Counter Sink Washers - For Compatibility with M8 sized Foils.

 

This package takes the guesswork out of finding a user-friendly and versatile freeride foil setup that you can learn on, progress with and enjoy for years to come. Equipped with the free-flowing Space Skate wing, this setup is super agile and carvy and surprisingly fast for its size.

PACKAGE INCLUDES: 71cm (28”) mast, pedestal, Shift Fuselage, Space Skate 65cm front wing, 42cm rear wing, hardware, shim, neoprene wing covers, custom travel case

A larger, friendlier soft top, designed to make your journey into foiling as approachable and painless as possible.

Use it as a learning or teaching tool, your forever board if you’re just a casual foiler or as a crossover setup in the surf or behind the boat.

FEATURES: 

• NEW Cushy corduroy deck pad covers entire deck and rails
• NEW Leash plug allows for crossover from kite board to surf board
• Multiple Footstrap Insert Positions - Ride with 3 straps, 2 straps, 1 strap, half straps or no straps
• Larger, more buoyancy great for user-friendly progression
• Great crossover for surf and wake foiling
• Hard board with soft wrap, NOT a spongy foam board
• Ideal teaching tool for spouse, kids, friends, etc

PACKAGE INCLUDES: Simulator 5’6” board, foil pedestal mounting hardware

WHO IT'S FOR:

"Flag Screws" are a complete toolless hardware solution that will eliminate managing screws and track nuts or losing them when they fall out of the board in transit. *Flag Screws are M6, a smaller size than our standard foil track hardware. We recommend purchasing RapidTrack T-Nuts along with these screws to ensure compatibility.

PACKAGE INCLUDES:

1 x SS M6x25 FlagScrew1 x 6061 AL Anodized Washer

You’ll like this wing if:

• You want maximum lift and stability for SUP surfing success. Included with our FSUP package, this is our largest wing, and you’ll appreciate the extra surface area when you’re gliding across the water on barely a ripple and pumping in circles to catch wave after wave.
• You’re a SUP surfer or just looking to pump across the Ocean. This wing can pump for days even on flat water and holds large amounts of weight like SUP boards / heavier riders.
• You're a windsurfer that wants the ultimate go-slow pump foil wing. This wing is for the wind foiler that wants to be able to do carving tricks, foil out with ease and ride the tiniest bumps while luffing the sail.
• You're a wake foiler that is on the larger side (230 lbs +) looking for easy take off at lower speeds behind the boat.

CARVE / GLIDE / CROSSOVER

A one wing quiver that can be used for several sport categories. This medium-sized wing was made to carve while retaining a high glide rate and incredible pumping efficiency. If you had to choose one wing to cross over the widest array of sports categories, wind speeds, and wave size... this would be it!

WHY WE MADE IT

We wanted a one-wing quiver with a high glide rate, exceptional pumpability, and great carving characteristics that would cross over multiple sports.

WHY YOU’LL LOVE IT

+ Tons of forward traction from board pumping.

+ Great carving agility.

+ Early lift and great glide.

+ Crosses over to Wing, Wake, Surf, SUP, Windsurf, and larger kiters in light wind.

Dimensions

 

Package Includes

Quantum Carbon Wing 85cm, Neoprene Wing Cover, Mast Cap, Mast Cap Hardware

Flight / Control / Progression

DWARF CRAFT V3

• You want guaranteed success foiling in tiny to medium size waves or in light wind. This is the wing included with our FWind and FSurf package. Because of its large surface area and unique inverted gull wing shape, it’s the perfect balance between low-end lift and pumpability and faster top-end speed and performance.
  
• For Windsurfing, the perfect all around wing.  Early lift, low stall speed, and a 26mph top end.  Learn to fly, learn to jibe and float through lulls without compromising top end speed.
• If you’re prone surfing and want to turn freely and pump from one wave to the next. 

The Phantasm Technical Mastery (PTM) 684 Front Wing was developed by our design team using feedback from Phantasm riders worldwide. Riders who are looking for speed and agility, but still want great confidence-inspiring stability should look no further than the PTM 684.

WHY WE MADE IT

We built the PTM 684 Front Wing to give riders more performance while still maintaining stability and comfort.

WHY YOU'LL LOVE IT

•Riders will enjoy faster speeds, more agility and confidence inspiring stability
•The PTM 684 is the next step up after you have mastered the 633 wing.
•The Phantasm is modular—enjoy compatibility across the whole suite.

If you’re looking for a high-speed, big air wing that has grip to rail through turns and enough glide and float to cruise through the lulls or foil back-winded - this is your wing.  The Infinity 65 is the fastest and most high performance wing in the Hover Glide range.

Wake: An excellent choice for towing with the rope in hand, riding at higher speeds, and boosting big airs / jumping.

Surf: Perfect wing for towing and surfing powerful waves. Designed for speed and agility, the Infinity 65cm delivers impressive top end speed for waves with power.

Wind: The choice for windsurfers who want high speed and big jumps in medium to high wind.  Offers great carvability and enough lift and glide to sail back winded for all the latest freestyle tricks.

KITE

If you’re looking for the most well rounded wing in the Hover Glide range, this is it.  With equal parts lift, speed, stability and turning, the Apollo 60 is ready for anything you can throw at it. Perfect for going fast, carving, as well as learning all the latest tricks and fancy foot placement.

You’ll like this wing if:

• You want a stable, user-friendly foil you can ride at slow speeds, surf the smallest wake and waves or kite in super light wind. The Gamma 68cm is the wing of choice for our FWake package due to its flat profile that makes it super stable from side-to-side and give it tons of lift for surfing wakes as small as a jetski ripple.
• For Windsurf Foil:  Easy entry level wing, low stall speeds that make it great for jibing even if you bobble a bit, great upwind ability and overall stability.  

You’ll like this if:

• You want a playful wing you can rock from heel to toe like you’re carving a longboard on fresh asphalt. The Space Skate wing included with our FKite package, but is also a great option for behind the boat and surfing small to medium size waves. It has plenty of lift at slower speeds, making it great for entry-level foilers, and it rides with a loose, freeride feel that self-centers as you bounce from turn to turn.

You’ll like this wing if:

• You like to go fast, very fast. This is the fastest wing in the Hover Glide lineup, and it rivals our carbon Ghost Whisper line in terms of top-end performance. This is for an advanced foiler’s quiver- to add for high wind or big wave days when you need a wing that can handle speed and power without wanting to rocket out of the water. 
• You're a windsurfer that wants the 30kt wing with insane grip through turns.  If you want top speed and full throttle carving,  this wing is for you.

The Phantasm aluminum mast is made from light and strong 7075 aircraft-grade aluminum. It is compatible with all Phantasm fuses and is 15% lighter, and 12% stronger than the regular Hover Glide mast.

Package Includes:

Phantasm Wide Mast, Pedestal Adapter, Phantasm Fuse Adapter, Hardware, Padded Mast Bag, Foil to board mounting hardware

48cm Rear Stabilizer wing for Slingshot Infinity 84 front wing.

The Phantasm features a high-performance aircraft-grade aluminum alloy fuselage that has been shaped and designed to offer unmatched stiffness and strength.

Sport Specialty:

653 mm = Specialty Fuselage

710 mm = All Sports (except Wind Surf)

872 mm = Wind Surf

The Phantasm Jack Plate is an adapter that allows you to use your Phantasm foil with either a medium or deep Tuttle Box board. The Tuttle adapters can be moved forward or backwards on the plate, allowing for precise foil placement.

The Phantasm Jack Plate is an adapter that allows you to use your Phantasm foil with either a medium or deep Tuttle Box board. It's as simple as attaching either of the supplied medium or deep Tuttle adapters to the Jack Plate and then bolting the Jack Plate onto your Phantasm pedestal.

The Tuttle adapters can be moved forward or backwards on the plate, allowing for precise foil placement.

WHY WE MADE IT

• Allows for the use of the Phantasm foils with any medium or deep Tuttle Box board.
• Use your Phantasm foil with any Tuttle Box board

WHY YOU'LL LOVE IT

• Adds 1cm of length to your mast
• You can move the Tuttle adapter forward or back five different locations on the Jack Plate to perfectly place your foil's center of lift

Package Includes:Phantasm Jack Plate, Medium Tuttle adapter, Deep Tuttle adapter, Jack Plate to Tuttle Adapter hardware, Jack Plate to Phantasm Pedestal hardware

• Hover Glide foil fuselage for kite and wake foils.
• The standard 61 cm is designed for Slingshot's FKITE kite foil and FWAKE wake foil.
• Product is also compatible with the Slingshot Hover Glide modular system and all Hover Glide wings.

Transport your entire FWind foil in one low profile, padded case. Made from a durable canvas material that is molded and will hold its shape. This case is designed specifically for easy transport and to keep your foil safe.  Securely holds all of your complete foil components; wings, mast, fuselage and hardware.  

FEATURES:

• 4 Fully Fleece Lined Wing and Component Pockets
• Tarpaulin interior for fast drying
• 2 Mesh tool Pockets
• Heavy Duty grab handles
• Heavy duty, YKK® molded zipper

Transport your entire FSUP foil in one low profile, padded case. Made from a durable canvas material that is molded and will hold its shape. This case is designed specifically for easy transport and to keep your foil safe.  Securely holds all of your complete foil components; wings, mast, fuselage and hardware.  

FEATURES:

• 4 Fully Fleece Lined Wing and Component Pockets
• Tarpaulin interior for fast drying
• 2 Mesh tool Pockets
• Heavy Duty grab handles
• Heavy duty, YKK® molded zipper

 600D nylon ripstop shell offering abrasion and tear protection.

Sizes

5’6" (167.6cm) x 27” (68.5cm)

6’4” (193cm) x 30” (76.2cm)

6’8” (203cm) x 32.5” (82.5cm)

Have a Hover Glide mast and want to get into the new Phantasm platform? This mast-to-fuse adapter is your answer.

Now you can connect any of our Hover Glide masts to the new Phantasm Platform Fuse.

•Use the Hover Glide Mast you already own and upgrade setup to the new Phantasm foil platform.

Package Includes:Hover Glide Mast to Phantasm Fuse Adapter, Hardware

Transport your entire foil in one low profile, padded case. Made from a durable canvas material that is molded and will hold its shape. This case is designed specifically for easy transport and to keep your foil safe.  Securely holds all of your complete foil components; wings, mast, fuselage and hardware.  

 

FEATURES:

• 4 Fully Fleece Lined Wing and Component Pockets
• Tarpaulin interior for fast drying
• 2 Mesh tool Pockets
• Heavy Duty grab handles
• Heavy duty, YKK® molded zipper